GTI/Jetta/VR6 A3 (1993-99) MK3
Air/Fuel Ratio Gauge A3 (Mk3)
$69.99 USD
more details ... | This product is currently Out of Stock
Air/Fuel Ratio Gauge - New Design!
Duostyling Air/Fuel Ratio Gauge requires no mounting hardware, senders nor soldering. The gauge uses A3 dummy switch as its housing and the signal is picked up from the existing Oxygen sensor(O2) harness. Plug and play.
Why is air/fuel ratio important?
There are two ways above mentioned ratio can go wrong. Running too rich can destroy catalytic converter, as well as render spark plugs useless. Further more, too much fuel means not all of it burns in the combustion process, so the remaining gasoline washes down the cylinder walls and disolves engine oil, eventually causing low compression due to damaged cylinders and rings.
Running too lean can create even worse havoc, especially in force inducted DSCars. Lean is the worst nightmare for owners of turbo and supercharged DSCars. VW engines can handle a lot of boost but only if you supply enough fuel. Most of melted pistons and blown engines are caused by running too lean.
Using Add to Cart, will take you to Paypal where you can safely proceed with the payment. You do not need to have Paypal account, in order to purchase from our site.
|
Air Fuel Ratio and Voltage Gauge A3 (Mk3)
$109.99 USD
more details ... |
This product is currently Out of Stock
Dual Gauge - Air/Fuel Ratio and Voltage Gauge - great, stock look!!!
Duostyling Air/Fuel Ratio Gauge requires no mounting hardware, senders nor soldering. The gauge uses Corrado dummy switch as its housing and the signal is picked up from the existing Oxygen sensor(O2) harness.
With complementary design to Air/Fuel Ratio Gauge, our Voltage Gauge is the next important instrument. Always know the state of your alternator and battery, especially on those chilly mornings. The signal is picked up from any 12V circuit that comes on with the ignition.
Why is air/fuel ratio important?
There are two ways above mentioned ratio can go wrong. Running too rich can destroy catalytic converter, as well as render spark plugs useless. Further more, too much fuel means not all of it burns in the combustion process, so the remaining gasoline washes down the cylinder walls and disolves engine oil, eventually causing low compression due to damaged cylinders and rings.
Running too lean can create even worse havoc, especially in force inducted DSCars. Lean is the worst nightmare for owners of turbo and supercharged DSCars. VW engines can handle a lot of boost but only if you supply enough fuel. Most of melted pistons and blown engines are caused by running too lean.
For the best results, you can also install the gauge adding third oxygen sensor (single wire will work). Please consult sources, such as book Maximum Boost or similar.
Using Add to Cart, will take you to Paypal where you can safely proceed with the payment. You do not need to have Paypal account, in order to purchase from our site.
|
All
VDO 323-423 Oil Temperature Sender
$39.99 USD
more details ... | This product is currently out of stock.
Oil Temperature Sender VDO 323-423 is a standard VDO oil temperature sender with a range of 80-150 Celsius and mount of M10 x 1. It is suitable for A2 Golf, GTI, Jetta, GLI, A3 Polo, B3 Passat and Corrado. Some of the vehicles due to lack of mounts, might require a T fitting to accomodate an extra sensor.
Using Add to Cart, will take you to Paypal where you can safely proceed with the payment. You do not need to have Paypal account, in order to purchase from our site.
|
VDO 360-006 Oil Pressure Sender
$44.99 USD
more details ... | This product is currently out of stock.
Oil Pressure Sender VDO 360-006 is a standard VDO oil pressure sender with a range of 0-5 Bar and mount of M10 x 1. It is suitable for A2 Golf, GTI, Jetta, GLI, A3 Polo, B3 Passat and Corrado. Some of the vehicles due to lack of mounts, might require a T fitting to accomodate an extra sensor. Please note, oil pressure switch that is second connector on the sender does not provide a proper range for Mk2 and other DSCars to replace factory oil pressure switch. (The product not as shown)
Using Add to Cart, will take you to Paypal where you can safely proceed with the payment. You do not need to have Paypal account, in order to purchase from our site.
|
|
Attention international DSBuyers (other then US or Canada)!!!
Feel free to use our shopping cart to purchase items. Shipping to Western Europe and Asia for up to 4 gauges in one package is additional $16.00-$21.00 USD (total from $40.00-$45.00 USD), and you will be contacted with exact amount. Exception is single gauge value of $49.99 where shipping is $16.00 USD.
All the DSOrders that do not cover full shipping cost will be refunded to the buyer.
|
